INDUSTRIAL SACK LINES
HotNew
Bandera line for the co-extrusion of 7-layer blown tubular film year 2006
Bandera line for the co-extrusion of 7-layer blown tubular film year 2006. Equipped with raw materials management system with 18 components, 1 C3/8 1800 electronic treatment group, 1 Axis/contact winding center ESR 9000 TW-2000, 1 Chilled water production plant, etc
Description
Bandera line for the co-extrusion of 7-layer blown tubular film year 2006
- Brand: Bandera
- Year: 2006
- Max flat width laminating film: 1800 mm net
- Max flat width barrier film: 1650 mm
- Max linear speed: 80 m/min
- Max production barrier film: 350-400 kg/h ±10% (depending on material used, layers, with cooling air temperature not exceeding 15°C)
- Max production laminating film: 450 kg/h ±10% (depending on material used, layers, with cooling air temperature not exceeding 15°C)
- Barrier film thickness: 40 – 200 μ
- Laminating film thickness: 20 – 150 μ
- Lamination film for ground coffee packaging. For final use the film must be laminated with a 10 μ PET film possibly printed on the inside
- Flat width: 1300 mm, net
- Production: 400 kg/h
- Total thickness: 87 μ
- Lamination film for ketchup sauce packaging. For final use the film must be laminated with a 10 μ PET film possibly printed on the inside
- Flat width: 1300 mm, net
- Production: 350 kg/h
- Total thickness: 80 μ
- Toothpaste tube film
- Flat width: 1300 mm, net
- Production: 350 kg/h
- Total thickness: 181 μ
- Films for automotive use
- Flat width: 1650 mm, net
- Production: 300 kg/h
- Total thickness: 23 μ
- Raw materials management system with 18 components
- Loading system with 18 stations
- 5 vacuum pumps of 3 kw
- 1 m3 cartridge filter with vacuum indicator
- Vacuum relief valve
- 2 gravimetric dosing units with 4 components for A and G extruders
- 5 gravimetric dosing units for 2 components for B, C, D, E and F extruders
- A Extruder TRW 75 30D AFS/EVP for the inside layer A
- With new parts replaced in 2021: Feed bush, Screw, Material feeding section, Chiller dedicated to the first heating zone of the extruder
- Screw for extruder 75-30 MT/DC
- Motor AC three-phase 90 kW
- Screen changer BDL 75 manual
- BDL 75 manual screen changer
- B Extruder TRW 50 – 30D AFS/EVP
- With new parts replaced in 2021: Feed bush, Screw, Material feeding section, Chiller dedicated to the first heating zone of the extruder
- Screw for extruder 50-30 TE/DC
- AC three-phase motor 37 kW
- BDL 50 manual screen changer
- C Extruder TRW 65 – 30D AFS EVP
- Refurbished in 2022
- Screw for extruder 65-30 TE/DC
- AC three-phase motor 55 kw
- BDL 65 manual screen changer
- D Extruder TRW 65 – 30D AFS EVP
- With new Feed bush, Material feeding section, Chiller dedicated to the first heating zone of the Extruder has been installed, but the currently mounted Screw was regenerated in 2021 (New screw in stock and it can be installed)
- Screw for extruder 65-30 TE/DC
- AC three-phase motor 55 kw
- BDL 65 manual screen changer
- E Extruder TRW 65 – 30D AFS EVP
- Refurbished in 2022
- Screw for extruder 65-30 TE/DC
- AC three-phase motor 55 kw
- BDL 65 manual screen changer
- F Extruder TRW 50 – 30D AFS/EVP
- With new parts replaced in 2024: Feed bush, Screw and Material feeding section
- Screw for extruder 50-30 TE/DC
- AC three-phase motor 37 kW
- BDL 50 manual screen changer
- G Extruder TRW 75 30d AFS/EVP for layer G
- Refurbished in 2022
- Screw for extruder 75-30 TE/DC
- Motor AC three-phase 90 kW
- Screen changer BDL 75 manual
- Coex blow head 7 layers exph 500 co7
- Internal bubble cooling
- Ultrasonic sensor for controlling the cooling system
- High efficiency cooling ring AK 2
- Pack of reading and automatic thickness adjustment
- KRK film thickness measuring system
- Thickness measurement sensor oscillation device
- Automatic thickness control system 48 KB 400-500
- Control panel and data management for thickness gauge
- Tubular guide cage RA 1950 8-5 roll
- Swinging tow NSO 290 2000
- Frame 9 m
- Device for the release of internal tensions (curling effect )
- Additional chill rollers
- Relaxation tank
- Water elimination system
- Additional tow
- Tape guide device 2000
- C3/8 1800 electronic treatment group
- Rewinding unit Axel / contact ESR 9000 TW-2000
- Configuration Opposed to Bridge**
- Central Service Passage
- Winding Section
- For contact with rubber roller ∅ 477 mm controlled by a 3 kW AC motor and controlled vector inverter. With control on the axis of the winding spindle via brushless motor
- Combined Winding
- Control Panel: Siemens S7 PLC
- Technical Data: Reel Width: 1900 mm (including trim), Max Diameter: 1200 mm (with 6” mandrel with millimeter scale), Usable Winding Mandrel
- Diameter Range: 70-150 mm. Winding Speed Range: 5-100 m/min
- Device for Winding in 2 Directions
- ”Safe load” mandrel loading device
- Completes the automation of the rewinder by automatically bringing the spindles to the waiting positions
- 4v2g static remover
- Wire winder device
- Coex line control panels
- General power panel
- 8 thermoregulation modules
- Control desk with coex line supervisor
- Software package
- Remote assistance modem
- Chilled water production plant
- AX-A 190 chiller
- Cooling coil for IBC BRA 25 system
- Cooling coil for external ring BRA 55
- Maintenance reports, including the history of revisions and malfunctions over the past 5 years available
- Visible in production
- Availability: 1 – 3 months from down payment
How to get it?
CBS SALES SUPPORT
- Quick and honest answers
- No automated service, person to person approach
- 100% safe and secure
DISMANTLING & INSTALLATION
Grow your business with CBS Company.
CBS Company provides complete technical service. Our technical staff is complete with mechanics, electricians, and operators: we will not only install your machine but will start it up and educate your operators.
Are we available for any questions after the work is done?
The answer is YES.
We stay in touch online with our clients after the machine is installed, we are there for you 24/7.
If you wish, CBS Company helps you with the delivery of machine door to door. We can work with your shipping agent or recommend you the one if you are new to this. You are safe and satisfied if you choose to work with CBS Company on the turnkey basis projects.
We welcome you to read more about our services.
