TARANTO Slitter rewinder year 2007 with FBF hot Microperforator year 2007 and VIARA Macroperforator year 2006
- Taranto is a machine dedicated to rewinding material. It is a slitter rewinder designed for micro and macro perforation, so it is not a machine to be purchased solely for the use of a pure slitter rewinder.
- It is designed with the logic of incorporating micro and macro perforation. The true value of the machine lies in micro and macro perforation.
- For this type of processing, you can operate at a speed of 80 m/min. The speed is determined by the micro and macro perforator.
- Brand: TARANTO Srl
- Year: 2007
- At the beginning of the process, adjust the winding speed, and set the required length for each cut.
- Composed by unwinder / rewinder and longitudinal cut by blades
- Set of cuts: 2-3
- There are three pairs of blades anchored behind the winder.
- There are two independent winding stations to allow for excellent flexibility of use. It is possible to wind from 1 to 3 rolls (unfeasible for 4 rolls due to the need for an additional blade group).
- Each of the two winding stations is powered by a sliding motor with chain drive, which ensures constant tension maintenance.
- At the beginning of the process, adjust the winding speed, and set the required length for each cut.
- In line system for the hot micro-perforation and cold macro-perforation
- Max working width: 1200 mm
- Max reel dia. of unwinder: 800 mm
- Max reel dia. of rewinder: 800 mm
- Materials: thickness from 10 to 200 my (material needs to be tested)
- Speed: max 100 m /min
- With FBF hot Microperforator type MFC of 2007 (Italy)
- Table: 1200 mm
- Smooth tubes of different sizes 5/10/15/20 mm for drilling in alternating smooth/perforated bands
- Needle holder for MF/HOT bronze for CE498 puncher
- Internal diameter 99 mm, External diameter 110 mm, Tip diameter 124.4 mm
- Length 100/50/25 mm
- Needle diameter 1.42 mm SHORT TIP
- Layout – Rhombus: horizontal diagonal 3.5 mm x vertical diagonal 8 mm
- Drilling density D09 (9 holes cm^2)
- Speed: 90 m/min
- Power consumption: 13,5 kW/380V/50 Hz
- Weight: 500 kg
- With VIARA macroperforator of 2006 (Italy)
- Layout: yes
- The motors for rewinding are slide-type and self-friction.
- The unwinding is a normal drive rollers three phases.
- Spacers: 2 x 5 mm, 3 x 10 mm, 2 x 30 mm, 7 x 50 mm, 1 x 80 mm, 1 x 90 mm, 1 x 93 mm, 3 x 100 mm, 3 x 185 mm
- Needle perforation rollers: 4 x 25 mm, 4 x 50 mm, 9 x 100 mm
- Usage markets can include fruit, vegetables, etc
- Visible in operation
- Immediately available
