Euromac slitter rewinder model TB 6.06 year 2009
Euromac model TB 6.06 year 2009 is a slitter rewinder designed for film
Description
Euromac slitter rewinder model TB 6.06 year 2009
- Brand: Euromac
- Model: TB 6.06
- Year: 2009
- Slitter-rewinder with individual winding stations with center-peripheral control
- Materials: flexible packaging materials from 25 to 180 microns
- Maximum width: 1400 mm
- Max mother reel diameter: 1000 mm
- Max finished reel diameter: 600 mm
- Inner core diameter unwinder: 152 mm
- Inner core diameter rewinder: 70, 76 mm
- Maximum speed: 600 m/min (depending on material, slitting width…)
- Center-peripheral rewinding system
- Each roll is wound on an independent station consisting of one or two oscillating arms on its support.
- Winding tension is provided by a combined central and peripheral draw system.
- Central draw is achieved by a transmission with pneumatically loaded clutch and it is regulated by multiple systems allowing adjustment of winding characteristics.
- Peripheral draw is achieved by contact of the winding rolls with the support drum.
- Contact pressure is regulated by pneumatic cylinders acting on the arms with double effect: pushing and compensating the weight of the forming roll.
- Unwinder SV 3.10ML
- Shaftless roll handling
- Hydraulic two-arm device for lifting the mother roll from the floor to working position.
- The two hydraulically operated roll arms allow lifting the mother roll from floor to working position.
- Arms are axially adjustable, allowing gripping of mother rolls of different widths.
- Material tension during unwinding is automatically controlled by a pneumatically loaded dancer roller. Signal from the dancer acts on an AC motor ensuring constant draw.
- Pneumatic brake for emergency stops.
- First roller after mother roll has variable parallelism, adjustable from both ends to compensate possible web misalignment.
- Rotation direction of unwinding roll can be clockwise or counterclockwise.
- With web guide
- Automatic Aligner brand FIFE
- Device for unwinder movement
- Electromechanical actuator for unwinder movement.
- Photoelectric sensor for edge and printed line detection.
- Sensor support adjustable across full working width.
- Electronic control unit.
- Control panel.
- Raised bridge – supporting bridge structure between unwinder and slitter
- Slitter rewinder Mod. TB 6.06
- Machine consists of two robust side frames, solidly joined with tie rods, carrying the following components:
- Variable parallelism roller before the draw group, adjustable from one side.
- Draw group with driven steel roller, rubber-coated surface.
- Pneumatically operated pressure roller for draw group.
- Series of idle rollers for web passage.
- 2 support drums in steel, rubber-coated, driven by main motor, one per winding side.
- Speed between main draw and secondary rollers adjustable to obtain correct tension in cutting zone.
- 2 crossbeams for winding stations, each with shaft and gears easily positioned to drive individual winding stations.
- 2 pneumatic bar pressers to lock bands during finished roll change
- Cutting group:
- Single-knife cutting group with pneumatic actuation, consisting of:
- 1 crossbeam with guide for single knives
- 1 pneumatically expandable counter-knife shaft with manual counterpoint opening for removal of counter-knives.
- 1 set of multiple counter-knives L=50 mm, pitch 7+3 mm.
- 16 single knives with pneumatic insertion.
- Option to insert interchangeable knife-holder flanges to the quick bayonet coupling of pneumatic single knives.
- 13 knife-holder flanges
- Rangefinder:
- 1 system with digital indication of position for each knife and counter-knife for easy and quick cutting setup
- Rewinder station:
- 15 winding stations model L/1 with single arm
- Min – max cutting width: 70 – 200 mm
- Max finished roll diameter: 500 mm
- 15 gears winding station control
- Control and regulation panel:
- Siemens TP270 operating panel for visualization and storage of working parameters
- Electrical devices:
- 1 AC motor for unwinding tension control.
- 1 four-quadrant AC motor for drive of draw group, cutting group, and support drums, allowing acceleration from zero to max speed without steps. 1 AC motor for winding stations drive with automatic speed reduction depending on wound roll diameter.
- Metal cabinet containing electrical/electronic equipment for machine operation.
- Programmable Logic Controller (PLC) for logical and analog function control.
- AC motors manufactured by Siemens.
- Air: 6 Bar
- CE certificate
- Electrical supply: 400 V – 3 Ph 50 Hz
- Visible in production
- Immediately available
How to get it?
CBS SALES SUPPORT
- Quick and honest answers
- No automated service, person to person approach
- 100% safe and secure
DISMANTLING & INSTALLATION
Grow your business with CBS Company.
CBS Company provides complete technical service. Our technical staff is complete with mechanics, electricians, and operators: we will not only install your machine but will start it up and educate your operators.
Are we available for any questions after the work is done?
The answer is YES.
We stay in touch online with our clients after the machine is installed, we are there for you 24/7.
If you wish, CBS Company helps you with the delivery of machine door to door. We can work with your shipping agent or recommend you the one if you are new to this. You are safe and satisfied if you choose to work with CBS Company on the turnkey basis projects.
We welcome you to read more about our services.
