Showing 1–12 of 20 results

Macchi mono extruder year 1993

Macchi mono extruder year 1993. Fully refurbished in 2015. Produces LDPE tube or film. Screw diameter is 60 mm. Output is up to 80 kg/h. In good working conditions.

W&H OPTIMEX blown film extrusion line year 2016

W&H OPTIMEX blown film extrusion line year 2016 is for the production of laminating film, 3 layers. The total time the machine has run is 22000 hours. Extruder combination 70/90/70.30D. Extruder A: 70.30D - outer layer, Extruder B: 90.30D - core layer, Extruder C: 70.30D - inner layer. Not visible in operation.

FARE Melt-blown extrusion and spinning plant YM-1600 year 2020

FARE Melt-blown extrusion and spinning plant YM-1600 year 2020 is suitable for the production of melt-blown polypropylene (PP) nonwovens for filtration applications such as face masks (inner filter layer), filters for the automotive sector, filters for vacuum cleaners, wipes, sleeves for absorbing hydrocarbons and oils. The line is in YM configuration, therefore prepared for the future insertion of a second Meltblown head (final configuration MM). The line can produce white or colored melt-blown nonwovens.

Primplast cast film extrusion line year 2002

Primplast cast film extrusion line year 2002 is for the production of 3-layer stretch film LLDPE. Equipped with chill roll primary, thickness control, trim shredder model 600 width 600, Croci. Speed is up to 600 m/min

Bielloni monolayer extruder year 1998

Bielloni monolayer extruder year 1998 is with screw OM80, double station band rewinder 1200mm, 180mm die, rotating tow. LDPE thicknesses from 18 to 170 microns.

Bandera line for the co-extrusion of 7-layer blown tubular film year 2005

Bandera line for the co-extrusion of 7-layer blown tubular film year 2005. Equipped with raw materials management system with 18 components, 1 C3/8 1800 electronic treatment group, 1 Axis/contact winding center ESR 9000 TW-2000, 1 Chilled water production plant, etc

Macchi co-extruder 3 layers year 2009

Macchi co-extruder 3 layers year 2009 is designed for production of tubular and foil. Workable materials are HDPE, BIMODAL HDPE, LDPE, mLLDPE, znLLDPE. COEX FLEX co-extrusion group gearless version on single size 2 platform, with high performance single screw extruder 55/30 D

Breyer (Germany) extrusion line year 1997

Breyer (Germany) extrusion line year 1997. Materials that can be processed are the following: APET or PET, PC in coextrusion with UV protection (coextrusion), PMMA with UV protection or anti-shock

GHIOLDI co-extruder year 2004

GHIOLDI 3 layers co-extruder year 2004 is designed for extrusion linear blends from 50% to 90% with low den PPA. Equipped with fixed co-extrusion head complete with IBC model 300 K73F IBC, upgraded with thickness control and ring K -Design. Includes No.2 Extruder E 65 APL, No.1 Extruder E 80 APL

Co-extruder Macchi 3 layers

Co-extruder Macchi 3 layers is cold part of 2004 , hot part of 2012. Equipped with bubble guide GSRC 2000/8-6, extruders 2 x 65/30, 1 x 100/30 rande dia. Die 400 mm, GAP 2 mm with 2 extruders Plastex 65/30 D and 1 extruder Plastex 100/30 D. Materials: LDPE, LLDPE- MDPE, EVA, PP , mLLDPE

Primplast monolayer extruder model PW 140 B year 2002

Primplast monolayer extruder is for production film 30-180 microns with screw dia 140 mm, extrusion head TPF 2 450 IBC Primplast, iron bench, corona treatment, thickness control

W&H VAREX 60/60/6030D year 2000

W&H VAREX 60/60/6030D year 2000 is 3 layers extruder designed for usage of LDPE and LLDPE materials, with die of 350 mm, film width of 1650 mm and film thickness of 0,05 mm for flat film and film thickness of 0,010-0,250 mm for dual. It's immediately available