EUROMAC TB-520 year 1989
- Brand: EUROMAC
- Model: TB-520
- Year: 1989
- For plastic film from 15 my up to 400 my
- Maximum web width: 2000 mm
- Maximum web diameter: 1200 mm
- Maximum rewind roll diameter: 600 mm
- Minimum rewind roll width: 180 mm
- Core rewind diameter: 3” (76 mm) & 6” (152 mm)
- Core unwinder: cardboard or steel cores (6” – 152 mm)
- Maximum speed: up to 400 m/min
- Unwinder: independent shaftless unwinder with mechanical expandable head and hydraulic lift of the loading arms.
- 2 Mechanical disk brake with pneumatic control driven by dancing roll.
- Both top or bottom unwinding direction possibilities
- 1 Operator Panel for reel loading command
- 1 Automatic side-lay control device (FIFE GP 25) with dedicated hydraulic pump station for trolley control
- 1 Pneumatic adjustable head for web edge reading
- 1 ACTIVE bar for electrostatic discharge
- 2 strong side frames joined with rods
- Set of idle rollers for web passage
- 1 rubber coated central drum roll
- 2 pressure roll pneumatically controlled to lock the strip during reel change
- 2 finished reel unloading unit with motorized belt mounted on floor rail and height adjustable. One for each rewinding bank
- 7 single circular blades with pneumatic insertion mounted on a crossbar with linear guide
- 1 Group of Multiple counter knife mounted on a motorized shaft (fixing dowels with Allen key tool)
- 1 Safety optical barrier to stop machine when entering at production speed
- New System (DELSAR Lame) installed in 2019 with excellent and sharp cut and easy/quick set-up in job change-over
- 6 rewinding stations composed each one of a couple of adjustable arms pneumatically controlled. (+ 1 couple of additional spare arms)
- Manual lock system for core fitting on each arm
- Central rewind system operated by pneumatic clutch
- Pneumatic control for roll pressure and automatic counter-pression
- Programmable automatic speed decrease ramp and stop at desired roll length
- 2 adjustable trim suction tubs to be connected to the main suction circuit (venturi fan not included)
- Dimensions: approx. LxWxH 6x3x2 mt. Cabinet approx 1×0,6x2mt)
- Power supply: 3 x 380 V – 50 Hz
- Visible in production
- Immediately available