INDUSTRIAL SACK LINES
New
Euromac slitter rewinder model TB 6.10M year 2010
Euromac model TB 6.10M year 2010 is a slitter rewinder with maximum width 1400 mm. Machine’s maximum speed is 600 meters per minute.
Description
Euromac slitter rewinder model TB 6.10M year 2010
- Brand: Euromac
- Model: TB 6.10M
- Year: 2010
- Central drum surface slitter rewinder
- Materials: films and combinations (paper+aluminium, paper+aluminium+PE etc.) up to 180 g/m²
- Max material thickness: 500µ
- Maximum width: 1400 mm
- Max reel diameter: 1200 mm
- Max finished reel diameter: 1000 mm
- Min – max cutting width: 200 – 600 mm
- Maximum speed: 600 m/min (depending on material, slitting width…)
- Unwinder model SV 2.12M
- Core: Shaftless pickup using mechanically expandable heads (152 mm diameter)
- Coil Holding: Two hydraulically driven, axially adjustable arms for lifting coils from the floor to the working position, with adjustable width (min. 500 mm)
- Tension Control: Automatic via a pneumatically loaded dancer roll, controlling a four-quadrant AC motor for constant pull
- Emergency pneumatic disc brake
- Rotation direction of the coil can be clockwise or counterclockwise
- Adjustable first idle roll for parallelism
- Mounted on wheels for ± 75 mm lateral movement
- Automatic alignment device for the running tape
- Automatic Aligner (FIFE Brand CDP-01)
- Movement: Hydraulic system for ± 75 mm unwinder movement
- Edge Detection: Photoelectric sensor for edge and printed line reading
- Adjustability: Full-width adjustment for the reading head
- Control: Electronic control system with push-button panel
- Connections: Hydraulic and electrical connections on the machine
- Deck
- A bridge-type support framework is located between the unwinder and cutting machine
- It allows the material to pass through using a series of idle rollers and provides visibility of the tape as it arrives from above
- Cutting unit
- Single knife cutting group with pneumatic drive, complete with:
- Crossbar with prismatic guide designed to hold the single knives
- Pneumatically driven expandable anvil shaft
- 5 pneumatic single knives
- Set of multiple anvils (L=50 mm)
- Rewinding Stations
- 4 rewinding stations (model L/2M) with two arms, driven by a brushless AC motor.
- Shaftless core locking with expandable and smooth contrast discs.
- Inner core diameter rewinder: 76, 152 mm
- Larger widths possible by reducing final diameter, depending on material thickness
- Stations available in right and left versions, allowing pairing for wider rewinding
- Pneumatic system for station opening/closing, unloading finished coils, and core insertion
- Control and Adjustment Panel Summary
- Main control panel with a SIEMENS TP270 operational panel, featuring a backlit VGA monitor, membrane keyboard, and memory for up to 100 recipes
- Displays: instantaneous speed (m/min), production length, total wound length, and total meter count
- Current indicators for AC motor power consumption
- Controls for start, stop, speed variation, and slow-speed feeding
- 4 electronic adjustments for winding tension and material curve control
- 2 manual adjustments for support pressure; 1 automatic adjustment for balancing coil weight during winding
- Secondary control panel near the unwinder and emergency stop buttons throughout the machine
- Electrical Devices Summary
- 4 motors in total:
- 1 AC motor (four-quadrant) for unwinding tension control
- 1 AC motor (four-quadrant) for driving the pulling system, cutting group, and support drums, with seamless acceleration
- 1 brushless AC motor for winding stations, with automatic speed adjustment based on coil diameter
- Metal cabinet housing all necessary electrical and electronic components
- Siemens Simatic S7 PLC for controlling the machine’s logical and analog functions
- Air: 6 Bar
- CE certificate
- Electrical supply: 400 V – 3 Ph 50 Hz
- Visible in operation
- Availability: August 2025
How to get it?
CBS SALES SUPPORT
- Quick and honest answers
- No automated service, person to person approach
- 100% safe and secure
DISMANTLING & INSTALLATION
Grow your business with CBS Company.
CBS Company provides complete technical service. Our technical staff is complete with mechanics, electricians, and operators: we will not only install your machine but will start it up and educate your operators.
Are we available for any questions after the work is done?
The answer is YES.
We stay in touch online with our clients after the machine is installed, we are there for you 24/7.
If you wish, CBS Company helps you with the delivery of machine door to door. We can work with your shipping agent or recommend you the one if you are new to this. You are safe and satisfied if you choose to work with CBS Company on the turnkey basis projects.
We welcome you to read more about our services.
