Bielomatik sheeter model P22-02/111 year 2006 with wrapper CSW25
- Brand: Bielomatik
- Model: P22-02/111
- Year: 2006
- The machine is refurbished and upgraded (S7 drive systems, new synchro main, cross cutter motor) by BW in 2020
- Daily capacity: 8.000 – 10.000 reams (owner’s 24h record 11.238 reams)
- This machine is designed to perform 4-pocket machine production capacity on only 2-pocket-easy-use. 4-piece of slitted 21-cm width paper are turned onto each other and cross-cut together
- Format cut-size A3/A4
- Min-max working width: 425-900 mm. Standard: 845 – 850 mm
Max Reel Capacity 60″ (1524 mm), 2.000 kg - Min-max paper weight: 40 – 160 gsm. (200 gsm is performed well at lower speed)
- Cut-off length: 297 mm (LG)
- Min-max collecting & counting: 100 (Sheets H: 10 mm) – 1500 (Sheets H: 15 mm)
- Cut sheets of paper are controlled by belts and transferred to overlapping and slower-tape-track so that paper sheets are gathered on each and ans slowed down to count and collect
- Counting is performed via cross cutter rotation and sensors. That is why it is almost impossible to make mistake on counting in proper operating procedure
- Counting range is from 100 to 1.500 sheets (1 cm to 15 cm in height)
- Finished reams are lowered by stacking table and transferred to conveyor belts
- Max speed: 550 m/min
- Output: A4 – 14 reams, A3 – 7 reams. Real average: 10 reams per minute
- Unwinder:
- Shaftless unwind station – 1 reel single stand
- Min 425 mm – max 960 mm width paper reels can be loaded
- Hydraulic brake system integrated with pneumatic dancing roller – web tension control
- Disc break and caliper break with fan-cooling system
- Web-edge control mechanism with manual spindle control. Made of stainless steel coated 4-edge decurling bar. Electronically activated during production
- All hydraulic systems are well maintained according to manufacturing instruction
- Original Bielomatik 4-steel disk breaks, original caliper, pneumatic pistons are spare parts
- Overhauled in 2021 – excellent performans on control over unwind reel both running and emerg stop
- 90-degree turning bars make air-cushion to paper webs to reduce friction and control over paper webs
- Turning bars air pressure controlled by own switches so as to avoid air-waste while working on A3 size
- 5 Slitting blades made by Dienes originally – trimming
- Blades and pulling bar is pneumatically activated
- Spare Dienes blade system and bunch of disk slitting blades
- Automatic ream wrapper machine CSW25 is an integrated part of the cut-size line but can also work individually
- Hot-melt system is Nordson Proglue 4 (4-liter tank) with all original Nordson Hoses and Heads
- Wrapping machine is sheet-feed model with Heidelberg suction head
- Exit gate heater
- The machine has 2 individual synchron motor (Siemens) to perform pull-and-cut
- Synchron motors and drives are upgraded by a TIP Project by BW Papersystems Hamburg 2021
- Main drive and cross cutter drive are included in the project
- Cutting tolerance +/- 0.015 mm which is the best in the market
Rubber coated squeeze roller pulls paper. Spare squeeze roller is included so that no down time in prod - Conventional cutting system – bottom knife is fixes and upper knife is rotating
- Original knives sets are included as spare parts (Both Tungsten Carbide and Steel Knives included)
- Acoustics cover to reduce noise and dust-removal fan
- Wide range of spare parts (including motor and ex-drives)
- Voltage: 400 V
- Frequency: 50 Hz
- Visible in production
- Immediately available
