Saldoflex MODULA 2013/S year 2017
- Brand:Saldoflex
- Model: MODULA 2013/S
- Year: 2017
- NON STOP welding machine
- New servo driven electronic
- For the production of bottom sealed bags and T-shirt bags up to four lines
- New table model “ MF/2-1350 – 4P ” for piling and collecting bags equipped with 4 hydraulic punching press to cut full automatically handles t-shirt bags
- Max film width: 1700 m
- Max roll dia: 1300 mm
- Maximum film lines no. 4.
- Slit sealer knife by nickel chrome no.3
- Maximum mechanical speed: 150 mt/min
- Maximum welding film thickness with slit|seal 80 microns
- Paint colour machine white and grey (if not requested differently)
- Min bag length: 330 mm
- Max bag length: with NON-STOP device 700 mm, with PAUSE device 1200 mm
- Max welding width: 1350 mm
- Min welding thickness: 0,010 mm HDPE, 0,015 mm LDPE
- Max total welding thickness: 0,320 mm
- Speed machine 280 cycles/min
- Punches mm: 4×100, 4×150, 6×180, 3×200, 3×220, 2×240
- One single unwind station
- Hydraulic system for lifting rolls from the floor. (shaft-less system)
- Automatic film tension control by multiple vertical dancing roller equipment and motorized
- Rubber wheels
- Automatic machine stop at end of film roll and with film break
- Horizontal manual hydraulic positioning of roll
- Electric power supply 400 Volts, 50 HZ – 3 phases + earth wires
- Total electric power installed 6 Kw
- Min. air compressed pressure ATE 6
- Air compressed consumption NL/1’ 50
- Net weight: approx. 1500 kg
- With new in line flexo printer stack type Filippini&Paganini 8 colors model “In line Flexol“ type 1600×1200
- Number of printing stations: 8
- Printing possibilities 8 + 0 / 7 + 1 / 6 + 2 / 5 + 3 / 4 + 4
- Min-max printing width: 800 -1600 mm
- Max web width: 1700 mm
- Min-max printing length: 400 – 1200 mm
- Mechanical speed: 160 mt/min
- Printing speed: up to 150 m.p.m. depending on the type and quality of materials to print, solvent inks, lacquers, printing,repeat length, plates, graphic design, ink coverage and colour overlay, required printing quality, speed of the bag-making machine etc.
- Thickness of the adhesive tape for the plate: 0,55 mm
- Photo-polymeric print plate thickness: 1,14 mm
- Anilox: 4×100, 4×120
- Rubber inking rollers diameter mm. 142
- Standard printing pitch gears circular 1 cm pitch
- Solvent and water base inks
- Material to be printed: LDPE and LLDPE: film thickness: 20 à 80 micron x 2 or 4, HDPE: film thickness: 10 à 80 micron x 2 or 4.
- Corona treatment: min. 38 dyn|cm
- The machine is in perfect condition, regularly serviced
- Visible in production
- Immediately available