Uteco JADE 815.4M year 1998-1999
- Brand: Uteco
- Model: JADE 815.4M
- Year: 1998-1999
- 8 colors (8+0)
- Central drum
- For filmÂ
- Material width: 1650 mm
- Print width: 1600 mm
- Unwinder: automatic turret for max reel dia.: 1000 mm (rotation by star system and moto-reducer)
- Rewinder: turret system for max max reel dia. 1000 mm (rotation by star system and moto-reducer)
- Automatic slitting system according to the printing speed . The frame of the slitting unit permits the automatic change in both winding directions.
- Change of the reel : automatic
- Hidraulic system for the loading for the reel (unwinder / rewinder)
- Mandrels with strips 76 mm and152 mm (unwinder / rewinder)
- No. 5Â blades holder supports
- No. 1 trim suction aspiration
- Web guide in exit with double pneumatic sensor manually driven
- General Console sytemÂ
- No. 3 control keypads for the pressures and registers
- Download of the finished reels:Â PONTI
- Print repeat min-max: 400-1350 mm (can reach 1500 mm by removing the protections)
- Maximum speed: 350 m/min
- Kamberoller web guide
- Calender for feeding Â
- With closed chamber doctor blades
- Printing units : no. 8
- Continuous moving of the inking cylinders when machine is stop
- Screened cylinder in iron type ceramic with diameter 185 mm
- Inking tanks with electrical pumps for the colour feeding
- Motorised longitudinal register driven by keypad (correction +/- 8 mm)Â
- Motorised cross register driven by keypad (correction +/- 10 mm)
- Screen Cylinders bearing caps hinged for fast change of the job
- Opening / closing of the hinged caps by automatic system (by robot) and manual (by operator) independent for every single colour
- Automatic washing system
- Automatic Robot for the downloading of the cylindersÂ
- Drying system: drying boxes between the colours in steel mounted on lateral sledges (tippers for the easy cleaning and removal). in 3 batteries of diathermic oil
- Drying tunnel : Dyathermic oil system. 6 m (2 hoods ) isolated of 3 m each) , double wall and opening by pneumatic pistons. 2 supply fans and 2 aspirations fans.
- Blowing elements with air blades with delivery and suction ducts with manual shutters to regulate the flow
- Transmission to the colours by one unique gear with helicoidal teeth with external crown in steel material.
- Â Pulling calander and cooling down
- Recirculation: yes
- Longitudinal cut with 5 blade holder
- Motorized rubber roll
- Trim suctionÂ
- Web guide in the exit with double pneumatic sensor by manual control
- No. 3 controllers for the set up of the pressures , registers connectable to sockets present in the printing unitÂ
- Ceramic screened cylinders/anilox: no. x 2 (250/5), no. 2 (420/4), no. 1 (160/7), no. 1 (200/7), no, 1 (100/11), no 1 (100/16), no. 1 (100/18),
- Robot for the automatic loading of the cylinders : the machine is equipped with cylinder trolley with 17 seats (for screened cylinders and printing cylinders) for preparing the next job when the machine in in production. This integrated system allow to take the elements and place in the different printing stations according to the exchange plan defined . It also permit the deposit of the cylinders (print cylinders and screened cylinders) after the work. It’s an automatic system completely automatic that permit the handling of the cylinders in and out of the printing stations for both screened and printing cylinders.
- Printing Ceramic Cylinders (no / diameter size): 4 series: Â no. 8 x 318,1 mm , no. 8x 327,8 mm, no. 8×337,5 mm, no. 8 x 343,8 mm
- Anilox (ceramic):Â no. 2 x 250 /5, no. 2 x 420/4, no. 1 x 160/7, no. 1 x 200/7, no. 1 x 100/11, no. 1 x 100/16, no. 1 x 100/18
- Gears : pitch 5 mm , module 1,5915
- Gears: no 8 gears 1010 (204 teeth) , no 8 gears 1050 (210 teeth) , no. 8 x 1080 (216 teeth), n 8 x 1080 (216 teeth) , no. 8 x 1100 (220 teeth)Â
- Energy requirements: 50 Hz +/- 2%, air : P=6 bar
- Webguide: shifting
- Overall dimensions LxWxH: 27040x11410x6800 mm
- Visible in production
- Immediately available
