FARE Melt-blown extrusion and spinning plant YM-1600 year 2020
- Brand: FARE
- Model: YM-1600
- Year: 2020
- SS line
- Suitable for production melt-blown polypropylene (PP) nonwovens for filtration applications such as face masks (inner filter layer), filters for the automotive sector, filters for vacuum cleaners, wipes, sleeves for absorbing hydrocarbons and oils
- The line is in YM configuration, therefore prepared for the future insertion of a second melt-blown head (final configuration MM)
- The line can produce white or colored melt-blown nonwovens
- Configuration: 1 head (YM)
- Useful width: 1575 – 1620 mm (in full height or up to 9 bands of 175-180 mm each)
- Working width: 1800mm
- Reel diameter: up to 1200mm
- Production speed: up to 150 m/min
- Capacity: 105 kg/h (840 tons/year)
- Grammage: 10-150 gsm
- Raw material: Polypropylene (PP) granules, melt-blown grade
- N.1 Power supply group for dosing of polymer and additives. Gravimetric type configuration. The unit is mounted on a steel frame above the extruder
- N.1 Extruder
- For continuous melting of the polymer
- Mounted on a special die-cast structure and complete with gear motor and thrust bearing. The main body of the feed section is made of special steel and is equipped with a special jacket for the circulation of the cooling water
- The cylinder is made of special high-strength bimetallic steel and is heated by electric resistances. The screw is made of special steel with high-resistance steel threads
- Motorization of the extrusion screw through an AC motor controlled by a frequency converter
- No. 1 filter for the continuous filtration of the molten plastic mass. Three-way non-stop configuration
- N.1 spinning head melt blown type for continuous spinning of the molten plastic mass. Useful height 1600 mm
- N. 2 packs of spinning
- N. 1 motorization group for the motorization of the spinning pump
- N. 1 heating unit
- No. 1 compressor for the continuous production of process air. Configuration: oil-free screw type
- N.1 velo training carpet for the continuous collection of fibrils
- N. 1 steel support structure independent and self-supporting structure for supporting the extrusion/spinning equipment
- N. 1 calibration group for nonwoven calibration. Configuration with two vertical cylinders
- N.1 electrostatic group for electrostatic charging of nonwovens
- N. 1 automatic winder for automatic winding and cutting of meltblown nonwoven on 3” cardboard cores
- Nonwoven tension control unit
- Winding unit
- Longitudinal cutting group equipped with 10 pneumatic knives
- Set electrical power, command and control panels
- N. 1 process control system for the control and management of the entire production process
- Set electrical cables and wiring materials
- N. 1 cleaning system for cleaning spinning packs
- Lab equipment set for nonwoven quality control
- Overall dimensions: about 9x20x6.5m (LxWxH)
- Raw materials warehouse: about 300 m2
- Finished products warehouse: ≥ 1000 m2
- Suggested building: ≥ 2000 m2 (typically 20×100)
- Technical documentation package on magnetic support in pdf format
- Visible in operation
- Immediately available
