INDUSTRIAL SACK LINES
New
La Meccanica Fumagalli TRR 1350 year 2021 Robotic
La Meccanica Fumagalli TRR 1350 year 2021 is one ply robotic line. The machine’s maximum working width is 1350 mm. It is equipped with automatic core loader, automatic roll breaker and flattening machine.
Description
La Meccanica Fumagalli TRR 1350 year 2021 robotic
- Brand: La Meccanica Fumagalli
- Model TRR 1350
- Year: 2021
- Robotic line
- 1 ply
- Maximum working width: 1350 mm
- Maximum diameter in unwinding: 1250 mm
- Max diameter in rewinding: 100 mm
- Min rewound diameter: 35 mm
- Outside diameter of tubes: 14,5 mm
- Minimum slitting width: 37 mm
- Maximum speed: 400 m/min
- Productivity approximate estimated on the full shift including change of mother rolls and normal start up and shift end:
- 880 shaft per 8 hours (considering rolls 80×80)
- 950 shaft per 8 hours (considering rolls 40 m long)
- 1050 shaft per 8 hours (considering rolls 20 m long-pos)
- Warning mark device with felt and spiral rubber shaft
- Adjustable bowed roller before slitting section
- Trim removing system
- Inverter motor
- Electronic programmable microprocessor for cycling
- Metar and cycle counter
- Circular slitting knives with spacers
- Automatic mother roll pneumatic lifter for charging
- Automatic web guide for paper edge or printed line
- Automatic core loader, automatic roll breaker and flattening machine
- 30 sets of knives shear type 15 mm wide
- Spacers: the owner has a selection of spacers available. These are low-cost and available from La Meccanica at all times.
- Female knives format 23 rolls x 57 (or 56,5) mm complete
- Female knives format 17 rolls x 79 mm complete
- Unwinding shaft inside dia 76 mm;
- Extra unwinding shaft for 70 mm tube
- Rewinding mandrels: 12, 17 and 25 mm (4 per each size)
- Trim aspirator – The two tubes are attached to the machine. The paper trim passes through these and into the customer’s chosen trim extraction system.
- Standard electric supply: 400 V – 50 hz – 3 phases
- No printer
- No shrinking machine
- CE certificate
- Visible in production
- Immediately available
About brand
Italian brand
Founded in 1947, LA MECCANICA FUMAGALLI SRL specializes in producing semi-automatic and automatic lines for cash register, multiply, and fax simile rolls.
They also manufacture slitting rewinding machines for paper and board of big diameter, core tube spiral winding machines, and recutters. Machine frames are milled, assembled, and tested in-house. Engineers handle installation, commissioning, and operator training at customer sites.
La Meccanica Fumagalli model TRLA 1350 year 2018 Semi-automatic
La Meccanica Fumagalli model TRL SM 1100 year 2000 Mechanical type
How to get it?
CBS SALES SUPPORT
- Quick and honest answers
- No automated service, person to person approach
- 100% safe and secure
DISMANTLING & INSTALLATION
Grow your business with CBS Company.
CBS Company provides complete technical service. Our technical staff is complete with mechanics, electricians, and operators: we will not only install your machine but will start it up and educate your operators.
Are we available for any questions after the work is done?
The answer is YES.
We stay in touch online with our clients after the machine is installed, we are there for you 24/7.
If you wish, CBS Company helps you with the delivery of machine door to door. We can work with your shipping agent or recommend you the one if you are new to this. You are safe and satisfied if you choose to work with CBS Company on the turnkey basis projects.
We welcome you to read more about our services.
